Wera 1834 Kraftform Ball-Grip Slotted Screwdriver Workshop Blade 1 x 6 x 150mm 120mm Reach
Μάρκα:
Wera
Wera 1834 Kraftform Ball-Grip Slotted Screwdriver Workshop Blade 1 x 6 x 150mm 120mm Reach
€16.33 inc. VAT
05007901001
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
Wera 1834 Kraftform Ball-Grip — a 1 x 6 mm slotted blade with 120 mm of reach
Slotted 1 x 6 mm120 mm exposed blade6 mm blade diameterKraftform 1800 handle
The Wera 1834 is a slotted screwdriver on the Kraftform 1800 handle, the one Wera specifies for high torques. The blade is 1 mm thick and 6 mm wide on a 6 mm round shaft, with 120 mm of usable reach. Wera calls it a workshop blade, and the handle is the full 1800-series design: soft zones that transmit power, hard zones that take palm pressure, finger recesses for fine adjustment and a narrow handle-to-blade transition so the tool reaches sunken screws in tight areas. Anti-roll protection at the rear keeps it where you put it down. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
Read the size carefully. The name “1 x 6 x 150 mm” means blade thickness 1 mm, blade width 6 mm, total blade length 150 mm — and that total includes roughly 30 mm anchored inside the handle. The exposed, usable blade is 120 mm, so buy on that figure if reach matters. Wera publishes no overall tool length for this article. Note that Wera’s datasheet also credits this slotted blade with a Lasertip finish, which is a claim normally made for cross-recess tips and appears in a block of text shared with the Phillips 1850 range — we mention it only as printed and would not rely on it. This is a plain slotted blade, not a PZ/S PlusMinus.
Best For
✓ Workshop and machinery maintenance
✓ Terminal and fixing screws with 6 mm slots
✓ Reaching sunken screws in tight areas
✓ Bench work over long sessions
Key Features
A 1 x 6 mm blade with real backing
Blade thickness 1 mm, width 6 mm, on a 6 mm round shaft. A slotted blade lives or dies by how well it fills the slot and how stiff the shank is behind it, and this is sized for genuine workshop use rather than light assembly.
Kraftform 1800 handle for high torque
Soft zones transmit power, hard zones take palm pressure, and finger recesses give control for fine adjustment. Wera specifies the 1800 series handle for high torques, and it is a constant 135 mm across the family.
Narrow transition, 120 mm of reach
The handle-to-blade transition is deliberately slim so the driver reaches sunken screws in tight areas — a recess, a counterbored fixing, a screw at the bottom of a housing. Usable blade is 120 mm.
Take-it-easy coding and anti-roll
Colour coding by profile with the size stamped on the handle means you pull the right driver from the rack first time, and the anti-roll protection at the rear stops it rolling off a sloped bench.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
Slotted screwdrivers are where a cheap tool costs you most, because a blade that does not fill the slot properly will chew the screw head and then slip into whatever is behind it. What you want is a blade sized to the slot, a shank stiff enough not to wind up, and a handle you can actually push through. This one gives you 1 mm by 6 mm on a 6 mm shaft with the Kraftform 1800 handle behind it. The one thing to get right when ordering is the length: the “150 mm” in the name is total blade length and you actually get 120 mm of reach. Browse our range in Cable Tools & Testers, or the wider Cables section for installation kit.
Buyer’s Guide
Buy it if
You need a properly sized 1 x 6 mm slotted driver with 120 mm of reach and a handle built for torque, for workshop and machinery work rather than light assembly.
Skip it if
Your slots are a different size, you need a shorter or longer blade, or you need an insulated VDE driver for work on live installations.
Also consider
The other 1834 length on the same handle, the 1850 PH Phillips range in the same Kraftform 1800 series, or a VDE-insulated set if you work on live electrical installations.
Colour
black
Χαρακτηριστικά
Product Code
04:545006
EAN Code
4013288222688
Manufacturer
Wera