Wera 1850 PH Kraftform Ball-Grip Phillips Screwdriver PH 2 x 100mm Lasertip 6.0mm Blade
Μάρκα:
Wera
Wera 1850 PH Kraftform Ball-Grip Phillips Screwdriver PH 2 x 100mm Lasertip 6.0mm Blade
€15.34 inc. VAT
05007906001
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
Wera 1850 PH Kraftform Ball-Grip — PH 2 with 70 mm of usable blade
Phillips PH 2Lasertip finish70 mm exposed blade6.0 mm blade diameter
The Wera 1850 PH in PH 2 is a Phillips screwdriver from the Kraftform 1800 series, a handle Wera specifies for high torques. The tip carries the Lasertip finish — a laser-roughened surface that bites into the screw recess and resists cam-out, which on a Phillips head is the difference between driving a screw and rounding it out. The handle has soft zones for power transmission and hard zones for palm pressure, with finger recesses for fine adjustment and a narrow handle-to-blade transition that lets the tool reach sunken screws in tight areas. Anti-roll protection at the rear keeps it on the bench. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
One thing to get right before ordering. Wera’s product name reads “PH 2 x 100 mm”, but 100 mm is the total length of the blade including the 30 mm that sits inside the handle. The exposed, usable blade is 70 mm. That 30 mm difference is constant across the whole 1850 family, so if you are buying on reach, work from the 70 mm figure. Wera publishes no overall tool length for this article at all, so we do not quote one. The tip is a genuine Phillips cross recess — not Pozidriv and not a PH/S PlusMinus blade. We also do not quote a weight for this article: Wera publishes 101 g, which cannot be right when the longer PH 2 x 150 with the identical 6 mm shaft is published at 102 g. Rather than repeat a figure that is demonstrably wrong, we leave it out.
Best For
✓ Assembly work needing torque on Phillips screws
✓ Reaching sunken screws in tight areas
✓ Bench and workshop use over long sessions
✓ Anyone tired of cam-out chewing up screw heads
Key Features
Lasertip resists cam-out
The tip surface is laser-roughened so it grips inside the screw recess rather than sliding out under load. Phillips is the profile most prone to cam-out by design, which makes this the feature that matters most on this particular screwdriver.
Kraftform 1800 handle for high torque
Soft zones transmit power, hard zones take palm pressure, and finger recesses give control for fine adjustment. Wera specifies the 1800 series handle for high torques, and it is a constant 135 mm across the whole family.
Narrow transition, 70 mm of reach
The handle-to-blade transition is deliberately slim so the tool reaches sunken screws in tight areas. The exposed blade is 70 mm on a 6.0 mm shaft, sized so the shank carries the torque a PH 2 screw demands.
Take-it-easy coding and anti-roll
Colour coding by profile with the size stamped on the handle means the right driver comes out of the rack first time. Anti-roll protection at the rear keeps it where you set it down.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
Phillips is a profile that cams out on purpose — it was designed in an era when slipping was preferable to over-torquing a production-line fastener. That is fine until you are the one whose screwdriver keeps jumping out and rounding the head. The Lasertip finish is the direct answer: a roughened tip that bites instead of sliding. Pair that with a handle Wera specifies for high torque and a 6.0 mm shaft matched to the PH 2 size, and the tool does what it should. The one thing to get right when ordering is the length: the “100 mm” in the name includes the shank inside the handle, and you actually get 70 mm of reach. Browse our range in Cable Tools & Testers, or the wider Cables section for installation kit.
Buyer’s Guide
Buy it if
You drive PH 2 screws at real torque and are tired of cam-out damaging heads, and 70 mm of reach with a handle designed for the load is what the job needs.
Skip it if
Your screws are Pozidriv rather than Phillips, you need a different blade length, or you were expecting 100 mm of usable reach.
Also consider
Other sizes in the 1850 PH range, the 1834 slotted Ball-Grip screwdrivers on the same handle, or a Wera Stubby set if clearance is the constraint.
Χαρακτηριστικά
Product Code
04:545003
EAN Code
4013288222695
Manufacturer
Wera