Wera 1850 PH Kraftform Ball-Grip Phillips Screwdriver PH 2 x 150mm Lasertip 6mm Blade Diameter
Brand:
Wera
Wera 1850 PH Kraftform Ball-Grip Phillips Screwdriver PH 2 x 150mm Lasertip 6mm Blade Diameter
€17.3 inc. VAT
05007907001
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Please sign in so that we can notify you about a reply
Wera 1850 PH Kraftform Ball-Grip — a PH 2 built around high torque
Phillips PH 2Lasertip finish120 mm exposed blade6 mm blade diameter
The Wera 1850 PH is a Phillips screwdriver from the Kraftform 1800 series, a handle Wera describes as built for high torques. The tip carries the Lasertip finish — a laser-roughened surface that bites into the screw head and resists cam-out, which on a Phillips recess is the difference between driving a screw and chewing it. The handle has soft zones for power transmission and hard zones for palm pressure, with finger recesses for fine adjustment and a narrow handle-to-blade transition that lets the tool reach sunken screws in tight areas. Anti-roll protection at the rear keeps it on the bench. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
One thing to be clear about before ordering. Wera’s product name reads “PH 2 x 150 mm”, but 150 mm is the total length of the blade including the 30 mm that sits inside the handle. The exposed, usable blade is 120 mm. That 30 mm difference is constant across the whole 1850 family, so if you are buying on reach, work from the 120 mm figure. Wera publishes no overall tool length for this article at all, so we do not quote one. The tip is a genuine Phillips cross recess — not Pozidriv and not a PH/S PlusMinus blade.
Best For
✓ Assembly work needing high torque on Phillips screws
✓ Reaching sunken screws in tight areas
✓ Bench and workshop use over long sessions
✓ Anyone tired of cam-out chewing up screw heads
Key Features
Lasertip resists cam-out
The tip surface is laser-roughened so it grips inside the screw recess rather than sliding out under load. Phillips is the profile most prone to cam-out by design, which makes this the feature that matters most on this particular screwdriver.
Kraftform 1800 handle for high torque
Soft zones transmit power, hard zones take palm pressure, and finger recesses give control for fine adjustment. Wera specifies the 1800 series handle for high torques, which is what you want on a PH 2 driving into hardwood or steel.
Narrow transition, 120 mm of reach
The handle-to-blade transition is deliberately slim so the tool reaches sunken screws in tight areas. The exposed blade is 120 mm on a 6 mm shaft — enough length to get into a recess without flexing.
Take-it-easy coding and anti-roll
Colour coding by profile with the size stamped on the handle means the right driver comes out of the rack first time. Anti-roll protection at the rear keeps it where you set it down.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
Phillips is a profile that cams out on purpose — it was designed in an era when slipping was preferable to over-torquing an assembly line fastener. That is fine until you are the one whose screwdriver keeps jumping out and rounding the head. The Lasertip finish is the direct answer: a roughened tip that bites instead of sliding, which on a PH 2 you notice immediately. Pair that with a handle Wera specifies for high torque, and the tool does what it should. The one thing to get right when ordering is the length: the “150 mm” in the name includes the shank inside the handle, and you actually get 120 mm of reach. Browse our range in Cable Tools & Testers, or the wider Cables section for installation kit.
Buyer’s Guide
Buy it if
You drive PH 2 screws at real torque and are tired of cam-out damaging heads, and you want 120 mm of reach with a handle designed for the load.
Skip it if
Your screws are Pozidriv rather than Phillips, you need a shorter blade for a confined space, or you were expecting 150 mm of usable reach.
Also consider
The 1850 PH in PH 3 x 150 for larger screws, a Wera Stubby set if clearance is the constraint, or a VDE-insulated driver if you work on live installations.
Features - Wera - 05007907001
More Details
Product Code
04:545004
EAN Code
4013288222701
Manufacturer
Wera