Wera 6003 Joker 15 Set 1 Combination Wrench Set 15 Pieces 5.5-19 mm Slim Non-Ratcheting for Narrow Spaces
Μάρκα:
Wera
Wera 6003 Joker 15 Set 1 Combination Wrench Set 15 Pieces 5.5-19 mm Slim Non-Ratcheting for Narrow Spaces
€237.46 inc. VAT
05020302001
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
Wera 6003 Joker 15 Set 1 — 15 slim combination wrenches from 5.5 mm to 19 mm for narrow installation spaces
15 wrenches, 5.5–19 mm15° placement pitch at the open endSlim ring, cranked 15°Unbroken metric run
The Wera 6003 Joker 15 Set 1 (part number 05020302001) is a fifteen-piece metric combination wrench set covering an unbroken run from 5.5 mm to 19 mm, built deliberately slim for narrow installation spaces. The 6003 is the non-ratcheting Joker: a fixed ring end cranked 15 degrees to the tool axis and an open end offset by 7.5 degrees, which with the double-hexagon geometry lets the wrench take the fastener every 15 degrees instead of every 30. It suits fitters, machine builders and service technicians who meet small fasteners as often as large ones. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
This is the non-ratcheting Joker: Wera never claims a ratchet, a holding plate or a limit stop for the 6003 line, so if you want the bolt held one-handed in the open end you need the 6000 Joker instead. This 15-piece version is the 11-piece set plus 5.5, 6, 7 and 9 mm, giving an unbroken 5.5 to 19 mm run; if you need 20 mm and above, the 22-piece 6003 set continues to 32 mm. Wera supplies a hook-and-loop fastener strip 50 x 240 mm but does not publish a pouch article number, so treat specific pouch references elsewhere as unconfirmed. Not insulated, not VDE-tested.
Best For
✓ Narrow installation spaces and shallow recesses
✓ Small fasteners from 5.5 mm upwards
✓ Machine building, panel work and building services
✓ Assembly where a slim ring must pass a flange
✓ Trades preferring conventional spanners over ratchets
✓ Setting up a Wera 2go system with hook-and-loop docking
Key Features
Unbroken 5.5 to 19 mm coverage
Fifteen wrenches run 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19 mm with no gaps, so small panel and fitting sizes are covered as well as the everyday 10 to 19 mm range that most compact sets stop at.
15 degree placement pitch at the open end
Wera states the low return angle in the open end takes the screw every 15 degrees, which lets the wrench work where less than 30 degrees of swing is available. The 7.5 degree offset of the jaw doubles the placement points against a conventional open end.
Slim ring cranked at 15 degrees
The ring side is slim and tilted 15 degrees to the tool axis. Wera notes the crank also helps prevent injury, and in practice it clears knuckles and adjacent components while sliding into recesses a bulky ratcheting ring cannot enter.
Double hexagon and Take it easy colour coding
Double-hexagon geometry on both ends secures the positive connection with the fastener and reduces slipping, and a 180 degree turn of the wrench gives four placement possibilities. Colour coding by size makes selection instant, and the hook-and-loop backing docks to the Wera 2go system.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
The interesting gap in most spanner sets is at the bottom. Compact sets start at 8 or 10 mm because that is where car and machinery work lives, but panel fixings, sensor brackets and small fittings are 5.5 to 7 mm, and that is exactly what this 15-piece run adds for 75 g and no extra box size over the 11-piece. The rest of the argument is the same as any 6003: it is the slim, non-ratcheting Joker, so you take it when space rather than time is the constraint, and the 15 degree placement pitch keeps you moving where a conventional open end would need a full flip. If your nuts run larger than 19 mm, step up to the 22-piece set instead of buying twice. Browse our Cable Tools and Testers range for the rest of the hand-tool line-up, or the wider Cables and Accessories section for installation material.
Buyer’s Guide
Buy it if
You want an unbroken metric spanner run from 5.5 to 19 mm in a slim profile, and you work in recesses and against obstructions where a cranked ring is the only thing that fits.
Skip it if
You want a ratcheting ring end or a jaw that holds the nut, you regularly meet fasteners above 19 mm, or you need insulated VDE spanners for live electrical work.
Also consider
The Wera 6003 Joker 11 Set 1 if you never need below 8 mm, the 22-piece 6003 Joker set that runs to 32 mm, or the ratcheting Wera 6000 Joker 11 Set 1 for the 8 to 19 mm range.
Χαρακτηριστικά
Product Code
04:518055
EAN Code
4013288222657
Manufacturer
Wera