Wera 8790 C Impaktor Deep Set 1 Impact Socket Set 11 Pieces 1/2 Inch Drive Metric 13-27 mm Deep Sockets
Μάρκα:
Wera
Wera 8790 C Impaktor Deep Set 1 Impact Socket Set 11 Pieces 1/2 Inch Drive Metric 13-27 mm Deep Sockets
€212.2 inc. VAT
05004841001
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
Wera 8790 C Impaktor Deep Set 1 — 11 deep 1/2 inch impact sockets from 13 mm to 27 mm
11 sockets, 13–27 mm1/2 inch drive83 mm deepRated for impact wrenches
The Wera 8790 C Impaktor Deep Set 1 (part number 05004841001) is an eleven-piece set of deep impact sockets with a 1/2 inch drive, covering 13 to 27 mm with a uniform 83 mm length. Wera builds them with Impaktor technology for above-average service life and rates them explicitly for use with electric or pneumatic wrenches with a 12.5 mm square drive. The extra depth is what makes them useful: low-lying couplings in confined spaces and nuts sitting well down a protruding threaded rod. It is aimed at heavy-vehicle, tyre and industrial technicians. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
These are machine sockets for 1/2 inch electric or pneumatic wrenches, and each carries a cross hole and ring groove so the safety pin and retaining ring of a powered tool can be fitted — use them. Sizes are metric only: 13, 14, 15, 16, 17, 18, 19, 21, 22, 24 and 27 mm, so there is no 20, 23, 25 or 26 mm. The set contains sockets only; no ratchet, extension or driver is supplied. Not insulated and not VDE-tested. Note also that Wera does not describe Impaktor sockets as tungsten carbide — the published claim is Impaktor technology for above-average service life in an extremely robust forged design.
Best For
✓ Truck, bus and heavy-vehicle service
✓ Tyre bays and wheel work with impact wrenches
✓ Nuts on long protruding threaded rod
✓ Low-lying couplings in confined spaces
✓ Industrial maintenance and plant work
✓ Technicians already running 1/2 inch impact tools
Key Features
Deep 83 mm sockets across the whole range
Every socket in the set is 83 mm long, so the same reach is available at 13 mm as at 27 mm. That depth clears protruding studs and reaches couplings recessed below a flange, which is exactly where a standard-length impact socket runs out of travel.
Impaktor technology for above-average service life
Wera specifies Impaktor technology and an extremely robust forged design for above-average service life under impact loads. The hexagon profile allows precise, profile-friendly screwdriving with high power transmission rather than chewing the corners of the nut.
Built for powered tools, with safety retention
Wera states these are for use with electric or pneumatic wrenches with a 12.5 mm, that is 1/2 inch, drive. A cross hole and ring socket are provided so the safety pin and safety ring of a machine-operated tool can be attached, which is standard practice for impact work.
Take it easy colour coding and Twist and Lock storage
Colour coding by size means the right socket is picked at a glance in a dark bay. Wera’s Twist and Lock holder keeps the set rattle-free in transit rather than letting eleven heavy sockets loose in a tray.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
Deep impact sockets solve a very specific problem and it is worth being honest about it: if your fasteners sit flush, standard-length impact sockets are lighter, cheaper and easier to get into a tight bay. The moment there is a protruding stud or a coupling sunk behind a flange, though, nothing else works, and a technician improvising with an extension and a standard socket is how sockets get split. What Wera adds here is a consistent 83 mm across every size plus the cross hole and groove for proper pin-and-ring retention, which matters more on machine-driven sockets than any durability claim. Note that this is a socket-only set: pair it with a 1/2 inch impact wrench you already run, and keep a hand-torque tool for the final tightening value. Browse our Cable Tools and Testers range for the rest of the hand-tool line-up, or the wider Cables and Accessories section for installation material.
Buyer’s Guide
Buy it if
You run a 1/2 inch impact wrench and regularly meet nuts on protruding studs or recessed couplings between 13 and 27 mm that a standard-length socket cannot reach.
Skip it if
You work by hand with a ratchet and want a lighter standard-depth set, you need a 3/8 inch drive, or you need 20, 23, 25 or 26 mm.
Also consider
The Wera 8100 SB 12 Zyklop Comfort ratchet set for 3/8 inch hand work from 8 to 24 mm, or the Wera Click-Torque C 3 at 40 to 200 Nm for the final torque value after an impact run-down.
Χαρακτηριστικά
Product Code
04:518035
EAN Code
4013288224088
Manufacturer
Wera