Wera 9630 Magnetic Rail 6000 Joker 1 Ratcheting Combination Wrench Set 11 Pieces 8-19 mm with Joker Holding Function
Μάρκα:
Wera
Wera 9630 Magnetic Rail 6000 Joker 1 Ratcheting Combination Wrench Set 11 Pieces 8-19 mm with Joker Holding Function
€356.24 inc. VAT
05020014001
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
Wera 9630 Magnetic Rail 6000 Joker 1 — 11 ratcheting combination wrenches 8–19 mm on a 370 mm magnetic rail
11 wrenches, 8–19 mm80-tooth ring ratchetJoker jaw holding function9610 magnetic rail included
The Wera 9630 Magnetic rail 6000 Joker 1 (part number 05020014001) is a set of eleven 6000 Joker ratcheting combination wrenches covering 8 to 19 mm, supplied on the Wera 9610 Joker magnetic rail. Each wrench pairs a ratcheting ring end with an exceptionally fine 80-tooth mechanism and a Joker open end whose hardened, serrated metal plate holds the bolt so it does not drop out of the jaw. It suits mechanics, maintenance engineers and installers who work on metric hex fasteners and want the whole size run visible and to hand rather than loose in a drawer. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
Metric sizes only, and note the range is 8, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19 mm — there is no 9 mm wrench in this set, a point commonly mis-listed elsewhere. The eleven pieces are the wrenches; the 9610 magnetic rail is the carrier and is not counted in the headline figure. The wrenches are chrome-molybdenum steel with a nickel-chrome coating and are not insulated or VDE-tested, so they are not for live electrical work. The metal holding plate in the jaw is described by Wera as exchangeable, so treat it as a wear part on heavily used sizes.
Best For
✓ Automotive and machinery maintenance
✓ Assembly work on metric hex fasteners 8-19 mm
✓ Confined spaces where a full turn is impossible
✓ One-handed work where the bolt must stay in the jaw
✓ Workshop walls and toolboxes needing a visible size run
✓ Technicians moving between jobs with a carried rail
Key Features
Joker holding function in the jaw
A hardened metal plate with serrated teeth sits in the open end and bites into the bolt head, so screws and sockets stay put instead of dropping. Wera adds an integrated limit stop that prevents the wrench sliding down off the bolt head and lets you apply higher torque with confidence.
80-tooth ratcheting ring end
The ring side carries an exceptionally fine 80-tooth ratchet, which means very little swing is needed between strokes and the wrench keeps working in confined spaces where a conventional ring spanner would have to be lifted and repositioned.
30 degree return angle at the open end
Wera specifies a 30 degree return angle at the jaw, so the open end re-engages the fastener quickly without the time-consuming flipping and repositioning that a plain open-ended spanner demands. Double-hex geometry gives a positive fit and reduces the risk of rounding.
9610 Joker magnetic rail and colour coding
The set arrives on the Wera 9610 Joker magnetic rail, 30 x 370 mm, which holds up to eleven spanners and can be carried straight to the job. Wera’s Take it easy colour coding by size lets you pick the right wrench at a glance instead of reading stamped figures.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
The reason to pick the 6000 Joker over a normal combination spanner set is not the ratchet on its own but the pairing of that 80-tooth ring with a jaw that grips. In practice you start the nut one-handed in the open end, where the serrated plate stops it falling into the engine bay, then flip to the ring side and run it down without ever taking the tool off the fastener. The magnetic rail matters more than it sounds: it is what stops a set like this dispersing into a toolbox within a month. Its weak point is coverage, since the range stops at 19 mm and skips 9 mm, so pair it with a 6003 Joker set if you meet larger nuts. Browse the rest of our Cable Tools and Testers range for the hand tools that sit alongside it, or the wider Cables and Accessories section for installation material.
Buyer’s Guide
Buy it if
You work on metric fasteners between 8 and 19 mm and want a ratcheting ring end plus a jaw that holds the bolt, with the full size run carried on one magnetic rail.
Skip it if
You need 9 mm, you regularly meet nuts above 19 mm, or you need insulated VDE spanners for live electrical work, none of which this set covers.
Also consider
The Wera 6003 Joker 22 Set 1, which runs from 5.5 mm to 32 mm without the ratchet, or the Wera 6000 Joker 11 Set 1, the same eleven ratcheting wrenches supplied in a textile pouch instead of on a rail.
Χαρακτηριστικά
Product Code
04:503727
EAN Code
4013288228949
Manufacturer
Wera