Wera Bit-Check 6 Wood TX HF 1 6 Piece TORX Bit Set 50mm Self Holding for Wood Screws No Card
Brand:
Wera
Wera Bit-Check 6 Wood TX HF 1 6 Piece TORX Bit Set 50mm Self Holding for Wood Screws No Card
€29.94 inc. VAT
05056470001
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Please sign in so that we can notify you about a reply
Wera Bit-Check 6 Wood TX HF 1 — six 50 mm TORX bits that hold the screw without a magnet
HF self-holding tips6 x 50 mm TORX bitsTX 20 to TX 40Compact 72 x 65 mm pack
The Wera Bit-Check 6 Wood TX HF 1 is six 50 mm TORX bits from the 867/4 TORX HF series, in the sizes wood screws actually use. HF stands for holding function and it is the reason to buy this set: the tip geometry is shaped so that surface pressure between the bit and the screw recess wedges the screw onto the bit. There is no magnet and no sleeve involved, which means it works just as well on stainless and other non-magnetic fasteners, and it lets you place and start a screw one-handed, overhead or at arm’s length. Wera names Würth ASSY and Altenloh SPAX T-STAR plus screws as expressly suited. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
This set contains six bits and no bit holder — you will need your own 1/4″ holder or a chuck that takes bits directly. The bits are 50 mm with the drive specified to DIN ISO 1173-F 6.3, which differs from the D 6.3 specification Wera gives for its 25 mm bits. One detail Wera states in a footnote rather than in the headline: the TX 40 bit has a hexagonal blade shank and does not carry the Take it easy colour coding, so five of the six bits are colour-coded, not all six. If you are comparing this against article 05073639001, the contents are identical — same four bit articles, same quantities, same 50 mm length, same case. That article is the SB self-service version on a larger hanging card; this one is the compact 72 x 65 mm pack.
Best For
✓ Decking, timber framing and outdoor construction
✓ Overhead and one-handed screw placement
✓ Stainless and non-magnetic wood screws
✓ ASSY and SPAX T-STAR plus fastening
Key Features
HF holding function, no magnet needed
The bit tip is shaped so that surface pressure between the tip and the screw recess clamps the screw in place. Because the effect is mechanical rather than magnetic, it works on stainless and other non-magnetic screws where a magnetic holder gives up entirely.
One-handed starting
With the screw held on the bit, one hand positions the fastener and the other is free for the workpiece or the ladder. That matters most exactly where it is hardest: overhead, at full stretch, or on a roof where a dropped screw is gone for good.
50 mm reach in the sizes wood uses
Two TX 20, two TX 25, one TX 30 and one TX 40 — the working range for structural and decking screws. The extra length over a 25 mm bit reaches into countersinks and past obstructions without an extension.
Compact pack, same contents
At 72 x 65 x 12 mm and 78 g, this is the bare Bit-Check rather than the larger self-service card version. Identical bits, less packaging, and it drops straight into a tool pouch.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
The holding function matters more than the piece count here. Magnetic bit holders are common and they work well right up until the screw is stainless, at which point they do nothing — and stainless is what goes into decking and anything left outdoors. A geometric holding function does not care about the alloy. You feel it most on a ladder or overhead, placing a screw with one hand rather than balancing it on a bit tip. Two things to know: there is no bit holder in the box, and only five of the six bits carry the colour coding. If you have seen the same set listed at a different price on a big hanging card, that is the SB variant — same bits, more cardboard. Browse our range in Cable Tools & Testers, or the wider Cables section for installation kit.
Buyer’s Guide
Buy it if
You drive TORX wood screws overhead, at height or one-handed, or you work with stainless fasteners where a magnetic holder is useless. Six bits in the right sizes, in the more compact of the two packs.
Skip it if
You need a bit holder in the box, you want a broad multi-profile assortment, or your screws fall outside the TX 20 to TX 40 range.
Also consider
The Bit-Check 30 Wood 2 SB for a large mixed PZ and TORX assortment with a magnetic holder included, a 1/4″ universal bit holder to drive these, or a 25 mm TORX set if you do not need the extra reach.
Features - Wera - 05056470001
More Details
Product Code
04:518215
EAN Code
4013288226181
Manufacturer
Wera