Wera 1550/6 ESD Kraftform Micro Precision Screwdriver Set 6 Pieces for Electronics with Rack
Μάρκα:
Wera
Wera 1550/6 ESD Kraftform Micro Precision Screwdriver Set 6 Pieces for Electronics with Rack
€58.52 inc. VAT
05030180001
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
Wera 1550/6 ESD — 6-Piece ESD Precision Screwdriver Set
6 PiecesESD Safe, ≤10&sup9; OhmKraftform Micro HandlesRack Included
The 1550/6 ESD is a six-driver precision set for electronics benches where static discharge is the risk: Phillips PH 000, PH 00 and PH 0, a 0.35 x 2.5 mm slotted, a TORX PLUS 1 IPR and a Microstix driver, all on 40 mm blades in ESD-safe Kraftform Micro handles with a surface resistance of 10&sup9; Ohm or less. The handle carries a rotating cap and three zones — a precision zone at the tip, a power zone with soft inserts and a fast-turning zone below the cap — plus a non-roll feature. Tips are finished in Wera Black Point for an exact fit and corrosion protection. A rack is supplied. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
ESD-safe is not the same as insulated. These handles are dissipative, designed to bleed static charge away rather than to block current — there is no test voltage, no working voltage and no VDE or EN 60900 approval, so they must never be used on live circuits. The 1 IPR driver has no bore hole, so it will not fit a pin-in tamper-resistant TORX PLUS screw. The Phillips drivers are Asian / JIS geometry (PH 0 modified to JCIS 0), not neutral DIN Phillips. There is one slotted size only, no standard TORX, no hex and no Pozidriv — this is not a general electronics kit.
Best For
✓ ESD-controlled electronics benches
✓ Board-level and component repair
✓ Camera, optical and instrument work
✓ Static-sensitive assembly and rework
Key Features
ESD-Safe to 10&sup9; Ohm or Less
The handles are dissipative, so static built up on the tool bleeds away instead of discharging into a board. That is the whole point of an ESD set: the damage you never see is the component that fails three weeks later.
Three-Zone Kraftform Micro Handle
A precision zone for control at the tip, a power zone with soft inserts for torque, and a fast-turning zone below a rotating cap, so the palm stays still while the fingers spin. A non-roll feature keeps the tool on the bench.
JIS-Correct Phillips in Three Micro Sizes
PH 000, PH 00 and PH 0, the last modified to JCIS 0 — the Japanese camera industry standard. These are the sizes and the geometry found in cameras and Asian-made consumer electronics.
TORX PLUS and Microstix Included
A 1 IPR TORX PLUS driver for the small IPR fasteners in modern devices, and a 1572 Microstix driver, alongside the Phillips and slotted sizes — four profile families on one rack.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
An ESD set is bought for a failure you cannot see: a static discharge through a board does not stop it working today, it shortens the life of a component that fails weeks later on a customer’s desk. If your bench is static-controlled, the tools have to match or the mat and wrist strap are theatre. Two things to be clear about before ordering — ESD is not insulation, so nothing here goes near a live circuit, and the profile spread is narrow, so this complements a teardown kit rather than replacing one. Browse our Cable Tools - Testers category for more Wera precision tools, or the wider Cables range for related workshop supplies.
Buyer’s Guide
Buy it if
You work at a static-controlled electronics bench and need precision drivers whose handles will not carry a charge into the board.
Skip it if
You need insulated tools for live work, a broad teardown profile range, or security TORX PLUS with a bore hole.
Also consider
The Kraftform Micro 12 Electronics 1 (05073677001) for device teardown profiles, or the Kraftform Micro 12 Universal 1 (05073675001) for fine mechanics.
Χαρακτηριστικά
Product Code
04:455265
EAN Code
4013288194787
Manufacturer
Wera