Wera Kraftform Kompakt 20 RA-R Ratchet Screwdriver with Bit Magazine 6 Bits and Belt Pouch 1/4 inch
Μάρκα:
Wera
Wera Kraftform Kompakt 20 RA-R Ratchet Screwdriver with Bit Magazine 6 Bits and Belt Pouch 1/4 inch
€86.92 inc. VAT
05051514001
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
Wera Kraftform Kompakt 20 RA-R — Ratchet Driver with Pouch
6° Return Angle6-Bit Magazine in HandleTelescopic BladeBelt Pouch
The Kraftform Kompakt 20 RA-R is a pocket ratchet screwdriver that carries its own bits: six BiTorsion 25 mm bits — PH 1, PH 2, PZ 2, TX 20, TX 25 and a 1 x 5.5 slotted — live in a magazine inside the handle, so the tool leaves the pouch ready for the job. The fine-toothed ratchet sits in the handle with a 6° return angle, and the switch has a 0 position that locks it out for precise work. The blade is telescopic: push it into the handle for a stubby driver in tight access, pull it out for reach, or remove it entirely to use as a machine adapter. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
Wera counts only the six bits as the pieces — the screwdriver itself and the belt pouch are supplied in addition and are not itemised. Profile coverage is deliberately narrow: no PZ 1 or PZ 3, no PH 3, and no hex, square or tamper-resistant bits. The magazine holds exactly six, so it is full as supplied. The tool is not insulated and not VDE-approved and has no torque function. The telescopic blade gives less reach than a full-length driver, and Wera publishes no tooth count — only the 6° return angle.
Best For
✓ Pocket and belt carry
✓ Service calls and quick fixes
✓ Furniture and appliance assembly
✓ Bags where one small tool must cover a lot
Key Features
Six Bits Inside the Handle
A magazine in the handle holds PH 1, PH 2, PZ 2, TX 20, TX 25 and a 1 x 5.5 slotted, so the driver arrives at the job complete. Nothing to lose from a pouch and nothing to go back to the van for.
Telescopic, Removable Blade
Push the blade in for a stubby driver where there is no room, pull it out for reach, or take it out altogether and use it as an adapter in a machine. One tool covering three access situations.
Fine Ratchet with 0 Position
A 6 degree return angle for confined turns, plus a switch position that deactivates the ratchet entirely when you want the direct feel of a rigid screwdriver for the final tightening.
Rapidaptor Chuck with Strong Magnet
The 1/4 inch mounting takes bits one-handed and holds them with a permanent magnet, so a bit does not drop out of a driver pointed downwards into an assembly.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
The value of this one is that it is the tool that is actually with you. A ratchet driver with the bits in the handle goes in a jacket pocket or on a belt, so the six most common profiles are never a trip to the van away. The 0 position matters more than the ratchet does — being able to lock the mechanism out means you keep the feel of a normal screwdriver when you want it. Just be honest about the profile spread: six bits is a quick-fix kit, not an assembly set. Browse our Cable Tools - Testers category for more Wera hand tools, or the wider Cables range for related workshop supplies.
Buyer’s Guide
Buy it if
You want a small ratcheting driver that carries six common bits inside it and lives on a belt or in a bag.
Skip it if
You need broad profile coverage, long bits for recessed screws, insulated tools or a torque function.
Also consider
The Kraftform Kompakt 838 RA-R M Set 1 (05051061001) for fourteen 89 mm bits and a full-size ratcheting handle, or the Bit-Check 30 Diamond 1 (05057431001) to restock bits.
Χαρακτηριστικά
Product Code
04:544902
EAN Code
4013288234001
Manufacturer
Wera