Wera Kraftform Kompakt 400 RA SHK Set 1 Ratcheting T-Handle Set 18 Pieces for Plumbing Heating and HVAC
Μάρκα:
Wera
Wera Kraftform Kompakt 400 RA SHK Set 1 Ratcheting T-Handle Set 18 Pieces for Plumbing Heating and HVAC
€138.52 inc. VAT
05136072001
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
Wera Kraftform Kompakt 400 RA SHK Set 1 — ratcheting T-handle set for plumbing, heating and air conditioning
18 pieces80 teeth, 4.5° return angleMagnetic 8 and 10 mm nutsettersBits 89 mm long
The Wera Kraftform Kompakt 400 RA SHK Set 1 (part number 05136072001) is an 18-piece screwdriving set assembled for the plumbing, heating and air-conditioning trade, which is what SHK stands for. It pairs the 416 RA ratcheting T-handle, with 80 teeth and a 4.5 degree return angle plus a Rapidaptor chuck, with a 119 mm 816 R bit-holding screwdriver, fourteen 89 mm bits and two magnetic nutsetters at 8 and 10 mm. The long bits and the extended holder are the point: boiler, radiator and air-conditioning fixings sit deep inside casings. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
Nothing in this set is insulated and nothing is VDE-tested — not one item — so it must never be used on live electrical parts. This distinguishes it from the Kraftform Kompakt SH 2 PlumbKit, which does include a VDE handle and four insulated blades. Note also that Wera’s datasheet groups the 2 to 6 mm items under slotted and prints a quantity of five while listing six sizes: they are six Hex-Plus hexagon bits, and the set contains no plain slotted bit at all. Slotted heads are served only through the two PlusMinus PZ/S bits.
Best For
✓ Boiler, radiator and heating installation
✓ Air-conditioning and refrigeration service
✓ Sheet-metal and hose-clamp hex head screws
✓ Recessed fixings inside appliance casings
✓ Confined spaces where a wrist cannot turn
✓ SHK installers building a compact van kit
Key Features
416 RA ratcheting T-handle
The ratchet sits fully inside the handle with fine 80-tooth toothing and a 4.5 degree return angle, and a reversing lever changes direction one-handed. The crossbar shape gives far more torque than a straight grip on a seized fixing.
816 R with Rapidaptor quick-release
A 119 mm bit-holding screwdriver with the Rapidaptor chuck: push the sleeve to change bits one-handed, and a spring lifts the bit clear of the magnet. Between the two drivers you get leverage from the T-handle and reach from the straight one.
Magnetic nutsetters for hex heads
Two 869/4 M magnetic nutsetters at 8 x 50 and 10 x 50 mm handle the hex-head sheet-metal screws and hose clamps that fill heating and air-conditioning work, holding the fastener on the tool so it does not drop into a casing.
Fourteen 89 mm bits for deep fixings
PH 2, PZ 2, PlusMinus PZ/S number 1 and number 2, TORX TX 15, 20, 25 and 30 and Hex-Plus 2, 2.5, 3, 4, 5 and 6 mm. The 89 mm length is what reaches a screw sunk inside a boiler casing without fouling the sheet metal.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
Trade sets earn their name in the details, and here they are the two magnetic nutsetters and the 89 mm bit length. Heating and air-conditioning work is full of hex-head sheet-metal screws and hose clamps, and a nutsetter that holds the fastener is what stops it disappearing inside a boiler casing; the long bits then reach the fixings that sit well behind the panel. The ratcheting T-handle handles the seized ones. What this set deliberately is not is electrical, and that is worth stating because the sibling SH 2 PlumbKit does include VDE screwdriving while this one includes none at all. Choose by whether your day includes a terminal box. Browse our Cable Tools and Testers range for the rest of the hand-tool line-up, or the wider Cables and Accessories section for installation material.
Buyer’s Guide
Buy it if
You install or service heating and air-conditioning equipment and want a ratcheting T-handle, a long straight driver, 89 mm bits and magnetic nutsetters matched to the trade.
Skip it if
You need any insulated tool for terminal work, you need slotted-only bits or hex above 6 mm, or you want spanners and nutspinners rather than bits.
Also consider
The Wera Kraftform Kompakt SH 2 PlumbKit, which adds a VDE handle, four insulated blades and Joker Switch wrenches, or the Wera 2go SHK 1 for a full 30-piece SHK container.
Χαρακτηριστικά
Product Code
04:503746
EAN Code
4013288228369
Manufacturer
Wera