Wera Kraftform Kompakt Stubby Magazin 4 Bit Driver with 6 Bits PH 1-3 and Three Slotted 65mm
Μάρκα:
Wera
Wera Kraftform Kompakt Stubby Magazin 4 Bit Driver with 6 Bits PH 1-3 and Three Slotted 65mm
€22.38 inc. VAT
05008877001
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
Wera Kraftform Kompakt Stubby Magazin 4 — Phillips and slotted only, in a 65 mm handle
65 mm total lengthPH 1, PH 2 and PH 3Three slotted widthsMagnetic 1/4″ take-up
The Wera Kraftform Kompakt Stubby Magazin 4 is a 65 mm driver with six bits stored inside it, in a captive swivelling magazine that swings out of the handle for access. This is the traditional variant of the three: Phillips PH 1, PH 2 and PH 3 plus slotted bits in 4.5, 5.5 and 6.5 mm, and no TORX or Pozidriv at all. That gives it the widest Phillips and slotted coverage of the family, which suits general maintenance, older equipment and anything where the fasteners predate the modern drive types. A magnetic 1/4″ take-up at the front accepts any of them or any standard bit. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
Two things to know before ordering. First, the piece count: Wera describes this as a 6-piece set and the six are the bits only — the Kraftform Kompakt Stubby handle is in the box but is not counted, so you receive seven physical items. Second, the bit grade: the bits in this version are Z (tough) bits, not BiTorsion. Magazin 1 and Magazin 2 both ship BTZ BiTorsion bits with a torsion zone; this one does not, and Wera does not flag the difference in its set-level descriptions. Z means tough steel chosen to resist premature tip breakage, which is a different and lesser claim. Note also that the 117 x 64 x 42 mm figure on some listings is the packaging, not the tool — the tool is 65 mm long.
Best For
✓ General maintenance and repair
✓ Older equipment with Phillips and slotted fasteners
✓ Carrying one tool instead of a driver plus a bit case
✓ Anywhere a full-length screwdriver will not fit
Key Features
The widest Phillips and slotted range
PH 1, PH 2 and PH 3, plus slotted in 0.6 x 4.5, 1 x 5.5 and 1.2 x 6.5 mm. It is the only Magazin variant with PH 3 and the only one with three slotted widths, which is what makes it the general-purpose choice.
Bits stored inside the handle
The magazine is captive and swivels out of the handle body, so the bits cannot fall out and there is no separate case to lose. Six bits and the driver travel as one object.
65 mm total length
Short enough to work inside an appliance housing, behind a panel or in a cabinet where a conventional screwdriver cannot even be started. The Kraftform handle keeps the grip usable at that length.
Magnetic 1/4″ take-up
A strong permanent magnet holds the bit in the front seat, and it accepts any standard 1/4 inch hexagon bit. The magazine contents are a starting point rather than a limit on what the driver will take.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
Magazin 4 is the variant to buy if your work is maintenance rather than assembly. Older machinery, existing installations and general repair throw up Phillips and slotted fasteners across a wide size range, and this is the only one of the three that covers PH 1 to PH 3 and three slotted widths in a single 65 mm handle. Be aware of the trade, though: these are Z tough bits, not the BiTorsion bits in Magazin 1 and 2. On a stubby driver, where you cannot feel torque building, a torsion zone is worth having — so if your work is high-torque rather than varied, one of the other two may serve you better despite the narrower size range. Browse our range in Cable Tools & Testers, or the wider Cables section for installation kit.
Buyer’s Guide
Buy it if
Your work is general maintenance on Phillips and slotted fasteners across a wide size range, in places too tight for a full-length screwdriver, and you want the bits stored in the driver.
Skip it if
You need TORX or Pozidriv — neither is included — or you want BiTorsion bits with a torsion zone, which Magazin 1 and 2 have and this one does not.
Also consider
Kraftform Kompakt Stubby Magazin 1 for TORX with BiTorsion bits, Magazin 2 for Pozidriv with BiTorsion bits, or a Wera Stubby screwdriver set if you prefer fixed drivers to bits.
Χαρακτηριστικά
Product Code
04:518123
EAN Code
4013288219800
Manufacturer
Wera