Wera 7510 Kraftform Safe-Torque Speed Torque Screwdriver 1-3 Nm 1/4 inch Hex Drive 147.5 mm Five Preset Values
Μάρκα:
Wera
Wera 7510 Kraftform Safe-Torque Speed Torque Screwdriver 1-3 Nm 1/4 inch Hex Drive 147.5 mm Five Preset Values
€88.89 inc. VAT
05075810001
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
Wera 7510 Kraftform Safe-Torque Speed — 1–3 Nm Torque Screwdriver
1–3 Nm in Five StepsTorque Lock Position1/4 inch Quick-ReleaseSlip-Over Both Directions
The 7510 Kraftform Safe-Torque Speed is a torque screwdriver you set by feel rather than by dial: five detented values — 1.0, 1.5, 2.0, 2.5 and 3.0 Nm — are selected in seconds, and a sixth Torque Lock position turns the tool into a rigid screwdriver for loosening and for fasteners that need no torque control. When the preset value is reached the mechanism slips over with a clear audible and tactile signal, in both tightening and loosening directions. The 1/4 inch quick-release holder takes standard hex bits, and sockets can be driven through a separate adapter. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
The tool is supplied on its own — no bits, no socket adapter and no case are included. Torque is available only at the five fixed values listed; intermediate settings such as 1.8 Nm are not possible. Accuracy is stated by Wera as ±10%, and Wera declares no EN ISO 6789 conformity for this article — if your process needs a certified or calibrated tool, specify one that carries the standard. It is not insulated and not VDE-approved. In the Torque Lock position the torque limiter is fully disengaged.
Best For
✓ Assembly work with specified low torque
✓ Carbide insert and tool-holder screws
✓ Electronics and instrument enclosures
✓ Bicycle and cockpit hardware within 1-3 Nm
Key Features
Five Detented Torque Values
1.0, 1.5, 2.0, 2.5 and 3.0 Nm in 0.5 Nm steps, changed directly on the tool without a scale, a lock ring or a reference chart. Wera calls this Speed — it refers to how fast the value is set, not to rotational speed.
Torque Lock for Unlimited Torque
A dedicated sixth position disengages the limiter so the tool drives and loosens rigidly. Useful for backing screws out, where a slipping torque mechanism is a nuisance rather than a safeguard.
Signals in Both Directions
The slip-over mechanism releases clockwise and anti-clockwise with an audible click and a distinct change in feel, so the set value is respected on left-hand threads as well.
1/4 inch Quick-Release Holder
A robust quick-change chuck accepts standard 1/4 inch hex bits. Socket wrench inserts can also be driven if you add an adapter, which is not part of the delivery.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
The value of a stepped torque screwdriver is that people actually use it. A dial tool gets set once, left on whatever value the last job needed, and quietly ignored; five clear detents and a lock position get changed. Read the ±10% honestly, though: at 1.0 Nm that is a 0.1 Nm window, which is fine for enclosure screws and insert clamps and wrong for anything a torque certificate has to back. If you need the 2–6 Nm band instead, the sibling 7515 (05075815001) covers it. Browse our Cable Tools - Testers category for more Wera hand tools, or the wider Cables range for related workshop supplies.
Buyer’s Guide
Buy it if
You repeatedly tighten small fasteners to one of a handful of low torque values and want the setting changed in a second rather than dialled in.
Skip it if
You need continuous adjustment, a documented calibration certificate, an EN ISO 6789 declaration, or torque above 3 Nm.
Also consider
The Wera 7515 (05075815001) for 2-6 Nm, or the 7510/14 set (05075840001) if you also want the matching TORX, TORX PLUS and Hex-Plus bits.
Χαρακτηριστικά
Product Code
04:494274
EAN Code
4013288230669
Manufacturer
Wera