Wera 7515 Kraftform Safe-Torque Speed Torque Screwdriver 2-6 Nm 1/4 inch Hex Drive 147.5 mm Five Preset Values
Μάρκα:
Wera
Wera 7515 Kraftform Safe-Torque Speed Torque Screwdriver 2-6 Nm 1/4 inch Hex Drive 147.5 mm Five Preset Values
€92.67 inc. VAT
05075815001
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
Wera 7515 Kraftform Safe-Torque Speed — 2–6 Nm Torque Screwdriver
2–6 Nm in Five StepsTorque Lock Position1/4 inch Quick-ReleaseSlip-Over Both Directions
The 7515 Kraftform Safe-Torque Speed covers the middle band of hand-tool torque: five detented values — 2.0, 3.0, 4.0, 5.0 and 6.0 Nm — selected directly on the tool, plus a Torque Lock position that disengages the limiter for rigid driving and loosening. The mechanism slips over with a clear audible and tactile signal at the set value, clockwise and anti-clockwise alike, so a fastener is not quietly overtightened while your attention is on the assembly. A 1/4 inch quick-release holder takes standard hex bits, and sockets can be driven through a separate adapter. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
Supplied as a bare tool — no bits, no socket adapter, no case. Torque is available only at the five fixed values; the 2–6 Nm band is stepped in 1 Nm increments, coarser than the 0.5 Nm steps of the 1–3 Nm 7510. Wera states accuracy as ±10% and declares no EN ISO 6789 conformity for this article. It is not insulated and not VDE-approved. Torque Lock removes torque limiting entirely.
Best For
✓ Assembly to a specified mid-range torque
✓ Machine and equipment servicing
✓ Bicycle stems, clamps and cranks within 2-6 Nm
✓ Workshops standardising on repeatable torque
Key Features
Five Detented Torque Values
2.0, 3.0, 4.0, 5.0 and 6.0 Nm, changed on the tool in a second without a scale or lock ring. Wera brands this Speed, referring to how quickly the value is set rather than to rotational speed.
Torque Lock for Unlimited Torque
A sixth position disengages the limiter so the screwdriver drives and loosens rigidly — for backing screws out, and for fasteners with no specified value.
Signals in Both Directions
The slip-over release works clockwise and anti-clockwise with an audible click and a distinct change in feel, so left-hand threads are covered too.
1/4 inch Quick-Release Holder
A robust quick-change chuck for standard 1/4 inch hex bits, with socket wrench inserts usable via an adapter that is not part of the delivery.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
Six newton metres is the point at which a careless wrist starts stripping alloy threads, which makes this the more consequential of the two Safe-Torque Speed sizes. The 1 Nm steps are worth thinking about before you buy: if the values you work to are 2, 4 and 6 Nm you are fully covered, but a spec calling for 4.5 Nm cannot be met on this tool at all. Note also that ±10% at 6 Nm is a ±0.6 Nm window — fine for workshop assembly, not a substitute for a certified instrument. Browse our Cable Tools - Testers category for more Wera hand tools, or the wider Cables range for related workshop supplies.
Buyer’s Guide
Buy it if
Your work repeats a handful of torque values between 2 and 6 Nm and you want them selected on the tool instead of dialled in each time.
Skip it if
You need values below 2 Nm, intermediate settings, a calibration certificate or an EN ISO 6789 declaration.
Also consider
The Wera 7510 (05075810001) for 1-3 Nm in finer 0.5 Nm steps, or the 7515/7 Safe-Torque Speed Bicycle 1 set if you want the driver together with bicycle bits.
Χαρακτηριστικά
Product Code
04:494275
EAN Code
4013288228314
Manufacturer
Wera