Wera Stubby Set 1 5 Piece Screwdriver Set 350 PH Phillips and 335 Slotted Kraftform 79mm Overall
Μάρκα:
Wera
Wera Stubby Set 1 5 Piece Screwdriver Set 350 PH Phillips and 335 Slotted Kraftform 79mm Overall
€31.18 inc. VAT
05008870001
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
Wera Stubby Set 1 — five Kraftform screwdrivers under 80 mm long
5 pieces78.5 – 79 mm overallPhillips PH 1 and PH 23 slotted widths
The Wera Stubby Set 1 is five short screwdrivers built for places a normal driver cannot enter: two Phillips from the 350 PH series and three slotted from the 335 series, each with a 24.5 to 25 mm blade on a 54 mm Kraftform handle, giving an overall length of only 78.5 to 79 mm. That is short enough to work inside an appliance housing, behind a dashboard, in a control cabinet or anywhere the ceiling above the screw is measured in centimetres. The handles are the full two-component Kraftform design rather than cut-down versions — hard zones for speed, soft zones for torque, colour coding by profile and a hexagonal anti-roll feature. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
These are genuine Phillips screwdrivers, series 350 PH — not Pozidriv and not PlusMinus. If you need Pozidriv, the Stubby Set 2 is the same set with PZ 1 and PZ 2 in place of the Phillips pair; the three slotted drivers are identical between the two sets. One point of caution when comparing specifications: Wera’s dimension tables list a 54 mm figure that is the handle length, not the overall length — add the blade and the tools are 78.5 to 79 mm long. Wera does not state whether a rack or stand is supplied with this set, so please treat it as screwdrivers only unless we confirm otherwise.
Best For
✓ Appliance, automotive and dashboard work
✓ Control cabinets and enclosures with low clearance
✓ Carburettor and small engine adjustment
✓ Any repair where a full-length screwdriver simply will not fit
Key Features
Under 80 mm overall
A 24.5 to 25 mm blade on a 54 mm handle puts the whole tool at 78.5 to 79 mm. Where a standard 180 mm screwdriver cannot be started at all, these go in straight and turn.
Full Kraftform handle, not a cut-down one
The handle keeps Wera’s two-component design: hard zones let the hand slide for speed, soft zones grip for torque. On a short tool that matters more, because there is less leverage to work with and the grip has to do the job instead.
Genuine Phillips and three slotted widths
PH 1 and PH 2 from the 350 PH series, plus slotted blades in 0.6 x 3.5, 0.8 x 4 and 1 x 5.5 mm. Between them they cover the small fasteners that live in the awkward places these tools are made for.
Colour coding and anti-roll
Each handle is colour-coded by profile so you pick the right one without reading the tip, and the hexagonal anti-roll feature keeps the tool where you put it rather than on the floor under the appliance.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
Stubby screwdrivers are the tools you do not think about until the moment you need one, and then nothing else will do. The clearance above a screw inside an appliance, behind a dash panel or in a wiring enclosure is frequently under 100 mm, and at that point blade quality and handle design are irrelevant if the tool does not physically fit. What Wera does well here is refusing to compromise the handle: the Kraftform grip is the full design, which matters because a short tool gives you no leverage and the grip has to make up for it. Choose Set 1 if your cross-head screws are Phillips, Set 2 if they are Pozidriv. Browse our hand tool range in Cable Tools & Testers, or the wider Cables section for installation kit.
Buyer’s Guide
Buy it if
You regularly meet screws in places with under 100 mm of clearance, and your cross-head fasteners are Phillips. Five drivers covering the two Phillips sizes and three slotted widths that turn up in that kind of work.
Skip it if
Your cross-head screws are Pozidriv — take Set 2 instead — or you need insulated VDE drivers, TORX profiles, or full-length screwdrivers for general work.
Also consider
The Wera Stubby Set 2 for Pozidriv instead of Phillips, a full-length Kraftform set for general work, or a VDE set if you are working on live electrical installations.
Χαρακτηριστικά
Product Code
04:518013
EAN Code
4013288212337
Manufacturer
Wera