Wera 8009 Zyklop Pocket Set 3 Ratcheting Bit and Socket Set 27 Pieces 3/8 Inch Drive Metric 6-17 mm
Μάρκα:
Wera
Wera 8009 Zyklop Pocket Set 3 Ratcheting Bit and Socket Set 27 Pieces 3/8 Inch Drive Metric 6-17 mm
€183.4 inc. VAT
05004284001
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
Wera 8009 Zyklop Pocket Set 3 — pocket ratchet with a full metric socket run from 6 to 17 mm
27 pieces12 metric sockets, 6–17 mm72 teeth, 5° return angle125 mm extension included
The Wera 8009 Zyklop Pocket Set 3 (part number 05004284001) is the full metric version of Wera’s pocket ratchet kit: the 133 mm 8009 Zyklop Pocket, which is a 3/8 inch square ratchet and a 1/4 inch bit ratchet screwdriver in the same body, plus twelve metric sockets from 6 to 17 mm, a 125 mm extension with a free-turning sleeve, a bit holder and twelve bits stored in the handle magazine. The mechanism runs 72 fine teeth for a 5 degree return angle and the head locks in five positions. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
The drives are a 3/8 inch square for sockets and a 1/4 inch magnetic direct mounting for bits; there is no 1/4 inch square drive on the tool. Sockets are metric only, an unbroken 6 to 17 mm run — if you need imperial, Set 4 mixes six imperial with six metric sizes instead. Wera counts 27 without the hook-and-loop strip, and the textile box is described in the feature text but not listed as a separate delivery item, though it is supplied. This is hand-tool rated, not impact rated, and it is not insulated or VDE-tested.
Best For
✓ Automotive and machinery service work
✓ Assembly across a full metric size run
✓ Confined bays where a 5 degree return angle matters
✓ Technicians already on the Wera 2go system
✓ Bit and socket work with one tool in hand
✓ Van and workshop kits that must stay compact
Key Features
Ratchet and bit driver in one 133 mm tool
Magnetic direct mounting turns the 3/8 inch ratchet into a bit ratchet screwdriver, so hex nuts and screw heads are covered without swapping adaptors. That dual function is what justifies a 133 mm body in a kit this complete.
Twelve metric sockets, 6 to 17 mm
An unbroken run of 8790 HMB Zyklop sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14 and 15 mm at 29 mm long, plus 16 and 17 mm at 30 mm. That covers most European fastener work without a second set in the bag.
125 mm extension with a free-turning sleeve
The 8794 SB Zyklop extension reaches recessed nuts and the free-turning sleeve lets you steady the socket with one hand while the ratchet works. It is the piece the smaller Set 2 leaves out and the one you miss first.
72 teeth, 5 degree return and a five-position head
The reversible fine-tooth mechanism re-engages after only 5 degrees of swing, and the freely pivoting head locks at 0, plus and minus 15 and plus and minus 90 degrees for straight driving, cranked leverage or right-angled access.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
Set 3 is the version of this tool that most people should actually buy. The 8009 concept only pays off when the socket run is complete enough to finish a job, and an unbroken 6 to 17 mm plus a 125 mm extension is exactly that threshold; Set 2 with three sockets is a convenience kit by comparison. The dual drive is the real trick, since a bit ratchet and a socket ratchet are usually two tools and here the magnetic mount sits behind the square. Its honest limits are torque and power: no torque control, and Wera is explicit that hand tools do not belong on power drivers. Browse our Cable Tools and Testers range for the rest of the hand-tool line-up, or the wider Cables and Accessories section for installation material.
Buyer’s Guide
Buy it if
You want one compact box that covers metric hex nuts from 6 to 17 mm and the common screw profiles, driven by a single 72-tooth ratchet that also takes bits directly.
Skip it if
You need imperial sizes, you want a belt-worn kit rather than a box, or you need a documented tightening torque.
Also consider
The Wera 8009 Zyklop Pocket Set 4 for mixed metric and imperial sockets, or Set 2 if you want the same tool in a belt holster with three sockets.
Χαρακτηριστικά
Product Code
04:494263
EAN Code
4013288227560
Manufacturer
Wera