Zebra Z-Select 2000D Direct Thermal Paper Labels 51 x 38 mm, 250 Labels per Roll, 20 Rolls, Matte White

The Zebra 3003060 is a box of Z-Select 2000D direct thermal paper labels in 51 x 38 mm, 250 labels per roll and 20 rolls per box, for businesses printing barcodes and product labels on Zebra label printers.

Zebra recommends Z-Select 2000D for shipping, picking and receiving labels, shelf-edge, product and price labels, and labels on chilled goods. It uses a matte white paper face with a permanent adhesive and is made and pre-tested by Zebra for consistent print quality.

• 20 rolls of 51 x 38 mm Z-Select 2000D labels, 250 labels per roll (5,000 labels in total)
• Labels supplied on a glassine liner, ready to load
• No ribbon included — none is needed for direct thermal printing
• No printer, software or label design service included

• Direct thermal printing: no ribbon to buy or change — the heat-sensitive face darkens under the printhead.
• The 51 x 38 mm size (51 mm wide by 38 mm feed length) suits shelf-edge, price and small shipping labels printed on Zebra 2-inch mobile printers, which take small rolls.
• Topcoated or not, this is a paper face for indoor use; the topcoat protects the printhead and adds resistance to moisture and oils.
• Apply the labels above 0 °C; once applied and given about 24 hours to settle, they hold within -40 °C to +50 °C.
• Shelf life before use is 6 months if stored at 20–25 °C, 40–50% RH — buy in quantities you will use within that time.
• Order labels and spare rolls together for a new printer so you can start printing straight away; we can match the roll to your model.

• Do not use these with a ribbon expecting long-life print: direct thermal images fade with heat, sunlight and time, so they are not for archive or outdoor labels.
• Laser and inkjet printers — these are roll labels for thermal label printers only.
• Printers whose maximum media width is narrower than 51 mm, or whose media holder cannot take this roll.
• Long-term exposure to sunlight, heat or moisture.