Zebra Z-Ultimate 3000T Thermal Transfer Polyester Labels 50.8 x 9.5 mm, 14,980 Labels, White

The Zebra Z-Ultimate 3000T 3010055 is a roll of 14,980 50.8 x 9.5 mm white polyester thermal-transfer labels for Zebra thermal-transfer printers, made for labels that have to survive heat, abrasion, moisture and chemicals.

It is genuine Zebra media: the facestock, adhesive and liner are matched to Zebra resin ribbons, so you get sharp small text and barcodes that stay readable through handling, cleaning and temperature cycling. Typical jobs are asset tags, rating plates, sterile-services labels, PCB and electronics labels, parts exposed to water, friction or chemicals.

• 1 roll of Zebra Z-Ultimate 3000T labels, 50.8 x 9.5 mm, 14,980 labels per roll
• Labels supplied on a glassine liner, wound for Zebra thermal-transfer printers
• No ribbon, no printer and no core adapter included

• Each label is 50.8 x 9.5 mm (2.00 x 0.37 in): set this size in the driver or ZebraDesigner before the first print, then run media calibration
• This is thermal-transfer stock: the image comes from the ribbon, so you need a resin ribbon loaded — Zebra 4800, 5095 or 5100 resin ribbon (5100 for harsh chemicals)
• A polyester facestock with a permanent acrylic adhesive is meant to stay on the item: it does not peel off cleanly once cured
• Service range -40 °C to +150 °C; apply at or above 2 °C on a clean, dry surface for full adhesion
• Typical use: asset tags, rating plates, sterile-services labels, PCB and electronics labels, parts exposed to water, friction or chemicals

• Direct-thermal-only printers (no ribbon) — this material will not image without a ribbon
• Wax ribbons — they will not give the scratch and chemical resistance this polyester is chosen for; use resin
• A printer whose media holder does not match the roll core and outer diameter — send us your model and we confirm the roll format first
• Inkjet or laser printers — these are roll labels for thermal printers only