Zyxel SFP10G-SR SFP10G-SR-ZZ0101F SFP+ Transceiver 10GBASE-SR 850 nm Duplex LC Multimode up to 300 m DDMI
Brand:
Zyxel
Zyxel SFP10G-SR SFP10G-SR-ZZ0101F SFP+ Transceiver 10GBASE-SR 850 nm Duplex LC Multimode up to 300 m DDMI
€169.38 inc. VAT
SFP10G-SR-ZZ0101F
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Please sign in so that we can notify you about a reply
Zyxel SFP10G-SR — 10G Multimode SFP+, 300 m
10 GbpsSFP+ SR850 nm · LCUp to 300 m
The Zyxel SFP10G-SR (ordering code SFP10G-SR-ZZ0101F) is a 10 Gbit SFP+ transceiver for multimode fibre, running at 850 nm up to 300 m over a duplex LC connection, with digital diagnostics (DDMI). It is the short-reach 10G optic for Zyxel switches, used for uplinks and server links inside a building. In practice, multimode optics are the cheaper choice for links inside one building: most server rooms and floor risers already carry OM3 or OM4 fibre, and the module plus a short LC patch cord is all a port needs. Before you order, check the fibre grade printed on the cable jacket and the real length of the run, including patch panels.
Compatibility — check before buying:
It is 10G multimode only; the 300 m figure is Zyxel’s maximum, and shorter reach applies on older fibre. This article is one module — the SFP10G-SR-E is the same optic as a 10-pack. For single-mode fibre choose the SFP10G-LR (10 km), and for RJ-45 copper the SFP10G-T. Zyxel lists supported transceivers per switch on its website. Keep the dust cap on until you connect the fibre, and clean both connector ends before every mating — dirt is the most common cause of a link that will not come up. Not sure? Send us your switch model and the cable run and we check it before you order.
Best For
✓ 10G uplinks between Zyxel switches
✓ Server and NAS links in one building
✓ Multimode runs up to 300 m
✓ Replacing a failed SFP10G-SR
✓ Zyxel switches with SFP+ ports
✓ Data-room cabling
Key Features
Wide storage range
Rated 0 to 70 °C in operation and −40 to 85 °C in storage, with digital diagnostics the switch can read.
Multimode fibre, short reach
Built for the short runs inside a building or data room over OM-grade multimode fibre. Reach depends on the fibre grade — the figures in the table are per grade, so check what is actually in your walls before you plan a link.
Monitoring you can read
Digital diagnostics (DDMI) let the switch report temperature, laser power and received light, so a dirty connector or a failing link shows up in the switch before users call.
Hot-swappable
Modules plug into a live port without shutting the switch down, so a link can be added or replaced during working hours. Seat it until it clicks and use the latch to remove it.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
The SFP10G-SR is the 10G optic we pair with Zyxel switches for runs inside a building. For links between buildings the SFP10G-LR is the right module, and for a copper server nearby, the SFP10G-T avoids a fibre run altogether. Every order is backed by Singular’s local support in Cyprus — if a link will not come up, send us the port status from the switch and we help you find out whether it is the optic, the cable or the configuration. Browse all transceivers and DAC cables or the switches they plug into.
Buyer’s Guide
Buy it if
You need a 10G multimode optic for a Zyxel SFP+ port on runs up to 300 m.
Skip it if
Your fibre is single-mode, the device is copper, or you need ten (SFP10G-SR-E).
Also consider
Zyxel SFP10G-LR for single-mode, or SFP10G-T for copper.
Features - Zyxel - SFP10G-SR-ZZ0101F
More Details
Product Code
04:106834
EAN Code
4718937567669
Manufacturer
Zyxel