Cisco QSFP-40G-SR4-S= QSFP+ Transceiver 40GBASE-SR4 S-Class 850 nm MPO-12 Multimode up to 150 m on OM4
Μάρκα:
Cisco
Cisco QSFP-40G-SR4-S= QSFP+ Transceiver 40GBASE-SR4 S-Class 850 nm MPO-12 Multimode up to 150 m on OM4
€2113.25 inc. VAT
QSFP-40G-SR4-S=
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
Cisco QSFP-40G-SR4-S= — 40G SR4 QSFP+, S-Class
40 GbpsMPO-12Ethernet onlyOM4 150 m
The Cisco QSFP-40G-SR4-S= is the S-class version of Cisco’s 40GBASE-SR4 QSFP+ transceiver: the same 850 nm MPO-12 multimode optics, reaching 100 m on OM3 and 150 m on OM4/OM5, for plain 40G Ethernet links between Cisco switches. It drops the features most data rooms do not use — breakout, FCoE and OM2 support. In practice, multimode optics are the cheaper choice for links inside one building: most server rooms and floor risers already carry OM3 or OM4 fibre, and the module plus a short LC patch cord is all a port needs. Before you order, check the fibre grade printed on the cable jacket and the real length of the run, including patch panels.
Compatibility — check before buying:
Cisco states that this module does not support 4×10G breakout and does not support FCoE. If you need to split a 40G port into four 10G links, order the QSFP-40G-SR4= instead. It needs an MPO-12 trunk and will not plug into duplex LC cabling. Keep the dust cap on until you connect the fibre, and clean both connector ends before every mating — dirt is the most common cause of a link that will not come up. Not sure? Send us your switch model and the cable run and we check it before you order.
Best For
✓ Plain 40G switch-to-switch links
✓ Spine-leaf fabrics on MPO cabling
✓ Cisco Nexus and Catalyst QSFP+ ports
✓ Ethernet-only data rooms
✓ Replacing a failed SR4-S
✓ Projects where breakout is not needed
Key Features
Same reach, Ethernet only
Keeps the 100 m OM3 / 150 m OM4 reach of the full SR4 for 40G-to-40G links, without the breakout and FCoE functions.
Multimode fibre, short reach
Built for the short runs inside a building or data room over OM-grade multimode fibre. Reach depends on the fibre grade — the figures in the table are per grade, so check what is actually in your walls before you plan a link.
Hot-swappable
Modules plug into a live port without shutting the switch down, so a link can be added or replaced during working hours. Seat it until it clicks and use the latch to remove it.
Plan both ends together
A link only comes up when both ends use the same standard, speed and media. Order the far-end optic, the patch cord and any spares in one go and the link works on day one.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
The SR4-S makes sense when every port runs 40G to 40G and nobody will ever break a port out. If that is not certain, the full QSFP-40G-SR4= keeps the option open. For duplex LC cabling, the QSFP-40/100-SRBD avoids new MPO trunks. Every order is backed by Singular’s local support in Cyprus — if a link will not come up, send us the port status from the switch and we help you find out whether it is the optic, the cable or the configuration. Browse all transceivers and DAC cables or the switches they plug into.
Buyer’s Guide
Buy it if
You need plain 40G links on MPO-12 multimode between Cisco QSFP+ ports.
Skip it if
You need 4×10G breakout, FCoE, OM2 fibre or duplex LC cabling.
Also consider
Cisco QSFP-40G-SR4= for breakout, or QSFP-40G-CSR-S= for 400 m on duplex LC.
Χαρακτηριστικά
Product Code
677AX15
EAN Code
0882658745416
Manufacturer
Cisco