DYMO Rhino 18053 Industrial Heat Shrink Tube Cartridge 9 mm x 1.5 m, 3:1 Shrink Ratio, Black on White Polyolefin
Μάρκα:
Dymo
DYMO Rhino 18053 Industrial Heat Shrink Tube Cartridge 9 mm x 1.5 m, 3:1 Shrink Ratio, Black on White Polyolefin
€42.03 inc. VAT
18053
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
DYMO Rhino 18053 — Heat Shrink Tube Labels, 9 mm x 1.5 m
9 mm · 1.5 m3:1 shrink ratioFlame-retardant polyolefinBlack on white
The DYMO Rhino 18053 is a 9 mm x 1.5 m cartridge of white, flame-retardant polyolefin heat shrink tubing that you print black text onto with a DYMO Rhino industrial label maker, then slide over a wire or cable and shrink with a heat gun for a permanent wrap-around marker.
Unlike a flag or wrap label, a printed heat shrink sleeve cannot peel off: it shrinks at a 3:1 ratio and grips the cable, so the identification survives pulling, oil and heat in panels, data cabinets and machines. The 9 mm width suits thinner wires and patch or control cables.
Before you order: Works only in DYMO Rhino industrial label makers and the other printers DYMO lists for this cartridge (DYMO Rhino 1000, 1800, 3000, 4200, 5000, 5200, 6000, 6000+; DYMO ILP 219; 3M PL100, PL150, PL300). It does not fit DYMO LabelManager (D1) or LetraTag machines, and you need a heat gun to shrink it. The sleeve must be slid over the cable before termination or connector fitting.
What's in the Box
- 1 DYMO Rhino heat shrink tube cartridge, 9 mm wide, 1.5 m of tubing
- White polyolefin tube, prints black
- No heat gun or label maker included
What It Means in Practice
- 3:1 shrink ratio: the sleeve shrinks to a third of its supplied diameter, so one size covers a wider range of cable diameters than a 2:1 tube.
- Flame-retardant polyolefin, UL Recognized to UL224, meeting SAE-AMS-DTL-23053/5 classes 1 and 3 according to DYMO’s technical data sheet.
- Maximum operating temperature 125 °C, so markers stay intact in warm cabinets and engine bays.
- Typical uses: wire and cable identification in electrical panels, data centres, telecom racks, machinery and vehicles.
What Will Not Work
- DYMO LabelManager, LetraTag and LabelWriter machines — this is a Rhino industrial (IND) cartridge.
- Cables already terminated with large connectors — heat shrink must go on before the end is fitted.
- Without a heat gun the tube will not shrink; a lighter will scorch the print and is not a substitute.
- DYMO does not publish a cable-diameter range per size on the product page — tell us your cable OD and we will suggest the right width.
Key Features
Permanent cable ID
Printed sleeve shrinks around the cable and cannot peel off.
3:1 shrink ratio
Covers a wide range of cable diameters per size.
Flame-retardant
Polyolefin tube, UL224 recognised, to SAE-AMS-DTL-23053/5.
Up to 125 °C
Maximum operating temperature stated by DYMO.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight · Buyer's Guide
Printed heat shrink is the most durable way to number wires: no flags to snag, no wraps to unwind. The trade-off is that it goes on before the connector, so plan labels before termination. Choose the width by cable diameter — ask us if unsure. See our full range of labels and label rolls.
✓ Buy it if you have a DYMO Rhino industrial label maker and mark wires and cables in panels, racks or machines.
✕ Skip it if your cables are already terminated, or you use a non-Rhino label maker.
→ Also consider DYMO Rhino 18055 (12 mm) or 18057 (19 mm) heat shrink for thicker cables.
Not sure which width fits your cable? Send us the cable outer diameter and your label maker model and we will check it before you order.
Colour
white
Χαρακτηριστικά
Product Code
04:181174
EAN Code
4078500001823
Manufacturer
Dymo