Intellinet 19-Inch Cable Entry Panel 2U with Brush Insert for Server and Network Racks, 1.5 mm Steel, Black
Brand:
Intellinet
Intellinet 19-Inch Cable Entry Panel 2U with Brush Insert for Server and Network Racks, 1.5 mm Steel, Black
€30.39 inc. VAT
712774
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Please sign in so that we can notify you about a reply
Intellinet 19" Cable Entry Panel, 2U, with Brush Insert — Black
2U brush entry1.5 mm steel483 mm wideRAL 9004 black
The Intellinet 712774 is a 2U, 19-inch cable entry panel with a brush insert: it fills a two-unit gap in a server or network rack and lets patch cords, power leads and fibre jumpers pass through the bristles instead of through an open slot. It suits anyone tidying a switch or patch-panel area who wants cables to reach the rear of the cabinet without leaving a hole in the front.
The panel is made of 1.5 mm steel with a black finish (Intellinet specifies RAL 9004) and is designed for horizontal installation. The bristles close around the cables, so the rack front stays covered, dust entry is reduced and the cable bundle is protected against sharp edges.
Before you order: The panel is 2U tall. Make sure you have two free rack units in the position where you want it, and check that your cabinet uses standard 19-inch (482.6 mm) mounting rails.
What's in the Box
- 1 × Intellinet 19" 2U cable entry panel with brush insert
- Mounting screws and cage nuts are not listed by Intellinet — if your rack kit has run out, add a set of M6 screws and cage nuts to the order
What It Means in Practice
- Pass cables from the front of the rack to the rear without leaving an open 2U gap
- Lets you run patch cords between a patch panel and a switch mounted at different depths
- The bristles reduce dust ingress and help keep front-to-back airflow working as designed
- A 2U opening gives enough room for thick bundles or cables with moulded connectors
What Will Not Work
- It does not fit 10-inch mini racks — the panel is 483 mm wide for 19-inch rails only
- It is not a sealed IP-rated grommet; it reduces dust but does not make a cabinet dust-tight or water-resistant
- It does not provide strain relief or tie points on its own — use a lacing bar or cable manager for that
- It is designed for horizontal mounting, not for vertical cable channels at the side of the rack
Key Features
Brush insert
Flexible bristles close around the cables, keeping the rack front covered while cables pass through.
2U opening
A two-unit height gives more room than a 1U brush panel for larger bundles and connectors.
1.5 mm steel
Solid sheet-steel frame that stays flat when screwed to the front rails.
Black finish
Black RAL 9004 finish matches most black server and network cabinets.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight · Buyer's Guide
A brush panel is the simplest way to stop a rack front from turning into a gap full of loose cables. The 2U version of this Intellinet panel gives room for dense bundles, and the 1.5 mm steel frame does not bend when tightened. Pair it with a lacing bar behind it for strain relief. Browse our rack accessories for shelves, blanking panels and cable managers.
✓ Buy it if you need a 2U pass-through point for patch cords or power leads in a standard 19-inch rack.
✕ Skip it if you only pass a few cables — a 1U brush panel is enough — or your rack is a 10-inch model.
→ Also consider a 1U brush panel for lighter cable runs, or a lacing bar for strain relief behind the panel.
Not sure it fits your setup? Send us the model of your rack, switch or device and we will check compatibility before you order.
Features - Intellinet - 712774
Colour
black
More Details
Product Code
04:156690
EAN Code
0766623712774
Manufacturer
Intellinet