StarTech.com GLCLXSMRGDST Cisco GLC-LX-SM-RGD Compatible Rugged SFP 1000BASE-LX LC Single-Mode 10 km -40 to 85 C
Μάρκα:
StarTech.com
StarTech.com GLCLXSMRGDST Cisco GLC-LX-SM-RGD Compatible Rugged SFP 1000BASE-LX LC Single-Mode 10 km -40 to 85 C
€47.91 inc. VAT
GLCLXSMRGDST
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
StarTech.com GLCLXSMRGDST — Cisco Rugged 1G LX SFP
1 Gbps1000BASE-LX−40 to 85 °CUp to 10 km
The StarTech.com GLCLXSMRGDST is a rugged Gigabit SFP transceiver for single-mode fibre, reaching up to 10 km at 1310 nm over an LC duplex connection, rated for −40 to 85 °C. It is programmed as a Cisco GLC-LX-SM-RGD, so Cisco industrial and edge platforms such as the IE 2000, IE 4000 and ASR 920 accept it, and it supports digital diagnostics. In practice, single-mode optics are the choice when a link leaves the building or runs several hundred metres: the OS2 fibre used by carriers and campus backbones carries the signal for kilometres with little loss. Before you order, confirm the fibre is single-mode at both ends and note the length and the number of patch panels on the way.
Compatibility — check before buying:
It needs single-mode fibre and an LX/LH module at the far end — it will not work over multimode fibre. It is coded as the Cisco rugged part; if your switch sits in an air-conditioned room, a commercial-temperature LX optic does the same job. For multimode runs inside an industrial site, Cisco uses the GLC-SX-MM-RGD. Keep the dust cap on until you connect the fibre, and clean both connector ends before every mating — dirt is the most common cause of a link that will not come up. Not sure? Send us your device model and the cable run and we check it before you order.
Best For
✓ Cisco IE 2000 and IE 4000 industrial switches
✓ Street cabinets and outdoor enclosures
✓ Factory and utility fibre links
✓ ASR 920 edge routers
✓ Single-mode runs up to 10 km
✓ Replacing Cisco GLC-LX-SM-RGD optics
Key Features
Built for harsh sites
Rated from −40 to 85 °C for switches in unheated cabinets, plant rooms and outdoor enclosures.
Single-mode fibre, long reach
Built for single-mode (OS1/OS2) fibre, the type used between buildings, floors and sites. It will not run over the orange or aqua multimode fibre found in many racks — the fibre type has to match at both ends.
Monitoring you can read
Digital diagnostics (DDM) let the host report temperature, laser power and received light, so a dirty connector or a failing link shows up before users call.
Hot-swappable
Modules plug into a live port without shutting the switch down, so a link can be added or replaced during working hours. Seat it until it clicks and use the latch to remove it.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
We recommend the GLCLXSMRGDST for Cisco industrial switches linked over single-mode fibre, where temperatures leave commercial optics out of spec. It comes with a lifetime module warranty from StarTech.com. For multimode fibre in the same cabinets, ask us for the rugged SX equivalent. Every order is backed by Singular’s local support in Cyprus — if a link will not come up, send us the port status and we help you find out whether it is the module, the cable or the configuration. Browse all transceivers and DAC cables or the switches they plug into.
Buyer’s Guide
Buy it if
You need a 1G single-mode link on a Cisco industrial or edge platform in a harsh location.
Skip it if
Your fibre is multimode, or the switch sits in a climate-controlled room and a standard LX optic is enough.
Also consider
StarTech.com GLCSXMMDST for multimode Cisco ports.
Port Spped
- 1 Gbps
Χαρακτηριστικά
Product Code
V933902
EAN Code
0065030868662
Manufacturer
StarTech.com