StarTech.com J9151E-ST HPE J9151E Compatible SFP+ Transceiver 10GBASE-LR 1310 nm LC Single-Mode up to 10 km with DDM
Brand:
StarTech.com
StarTech.com J9151E-ST HPE J9151E Compatible SFP+ Transceiver 10GBASE-LR 1310 nm LC Single-Mode up to 10 km with DDM
€289.3 inc. VAT
J9151E-ST
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Please sign in so that we can notify you about a reply
StarTech.com J9151E-ST — HPE J9151E Compatible 10G LR SFP+
HPE J9151E coded10GBASE-LRLC single-modeUp to 10 km
The StarTech.com J9151E-ST is a 10 Gbit SFP+ transceiver coded to work as the HPE Aruba J9151E, the current revision of HPE’s 10GBASE-LR optic. It runs at 1310 nm over single-mode fibre with an LC duplex connector, reaches up to 10 km and supports digital diagnostics. It suits HPE Aruba networks linking buildings and floors on switches such as the 2930F, 3810M, 5400R and CX 8325. In practice, single-mode optics are the choice when a link leaves the building or runs several hundred metres: the OS2 fibre used by carriers and campus backbones carries the signal for kilometres with little loss. Before you order, confirm the fibre is single-mode at both ends and note the length and the number of patch panels on the way.
Compatibility — check before buying:
It is coded as the J9151E revision — HPE states the CX 8325 accepts only J9151E or later, so older J9151A/D-coded optics are not a substitute there. It needs single-mode fibre and a 10GBASE-LR module at the far end; for multimode runs choose an SR module such as the J9150A-ST. It will not link to an 850 nm SR optic. Keep the dust cap on until you connect the fibre, and clean both connector ends before every mating — dirt is the most common cause of a link that will not come up. Not sure? Send us your switch model and the cable run and we check it before you order.
Best For
✓ 10G links between buildings
✓ Campus backbones up to 10 km
✓ Replacing a failed J9151E optic
✓ Keeping a spare on the shelf
✓ Floor-to-floor risers on single-mode fibre
✓ Budget-conscious 10G rollouts
Key Features
Coded as the E revision
Identifies as HPE’s J9151E, the revision HPE requires for the Aruba CX 8325 and accepted across the 2930F, 3810M and 5400 families.
Single-mode fibre, long reach
Built for single-mode (OS1/OS2) fibre, the type used between buildings, floors and sites. It will not run over the orange or aqua multimode fibre found in many racks — the fibre type has to match at both ends.
Monitoring you can read
Digital diagnostics (DDM) let the switch report temperature, laser power and received light, so a dirty connector or a failing link shows up in the switch before users call.
Hot-swappable
Modules plug into a live port without shutting the switch down, so a link can be added or replaced during working hours. Seat it until it clicks and use the latch to remove it.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
The J9151E-ST is the StarTech.com LR optic we fit on HPE Aruba networks, because the E coding keeps the CX 8325 happy as well as older ArubaOS switches. For Comware switches the coding differs — ask us for the matching part. Every order is backed by Singular’s local support in Cyprus — if a link will not come up, send us the port status from the switch and we help you find out whether it is the optic, the cable or the configuration. Browse all transceivers and DAC cables or the switches they plug into.
Buyer’s Guide
Buy it if
You run HPE Aruba switches, including the CX 8325, and need 10G single-mode links up to 10 km.
Skip it if
Your fibre is multimode (J9150A-ST), or your switch is HPE Comware.
Also consider
StarTech.com J9150A-ST for 10G multimode on Aruba switches.
Features - StarTech.com - J9151E-ST
Port Speed
- 10 Gbps
More Details
Product Code
V934585
EAN Code
0065030886345
Manufacturer
StarTech.com