Ubiquiti UniFi SnapMount Rack Kit 20-Pack Snap-In 1U Inserts with Captive 10-32 Nuts for 19-Inch Racks 10U Installation
Μάρκα:
Ubiquiti
Ubiquiti UniFi SnapMount Rack Kit 20-Pack Snap-In 1U Inserts with Captive 10-32 Nuts for 19-Inch Racks 10U Installation
€74.11 inc. VAT
UACC-Rack-PM-Kit
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
Ubiquiti UniFi SnapMount Rack Kit, 20-Pack Snap-In Inserts
20 inserts10U of mounting#10-32 threadTool-free snap-in
The Ubiquiti UACC-Rack-PM-Kit is a pack of 20 UniFi SnapMount inserts — 1U snap-in pieces, each with two vertically aligned captive nuts, that clip into a 19-inch rack rail and replace loose cage nuts for fast, uniform installation of UniFi and other rackmount devices.
Each insert covers one rack unit on one rail, so the 20-pack gives enough for 10U of equipment (two inserts per U, left and right). Inserts can be paired to mount larger devices, and they snap out again when you rearrange the rack. They are made of textured PA66 thermoplastic and fit rails up to 2.2 mm thick.
Before you order: The captive nuts are #10-32 (US rack thread), not M6. Use #10-32 screws — M6 screws that come with most European equipment will not thread into them. Ubiquiti also rates them for devices up to 400 mm deep at 1U (10 kg) and 325 mm deep at 2U (20 kg); deeper devices should be supported at the rear.
What's in the Box
- 20 × SnapMount rack inserts (each 1U, two captive #10-32 nuts)
What It Means in Practice
- Clip an insert into the rail at the right height and screw the device in — no cage-nut tool, no pinched fingers.
- All devices end up at uniform positions because each insert covers exactly 1U.
- Pair inserts for 2U devices such as UniFi NVRs or larger switches.
- Inserts come out again without tools when you re-arrange the rack.
What Will Not Work
- They will not accept M6 screws — the thread is #10-32.
- They are not rated for devices deeper than 400 mm (1U) or 325 mm (2U) without rear support, or above 10 kg (1U) / 20 kg (2U).
- They will not fit rails thicker than 2.2 mm.
- Ubiquiti does not list screws in the pack — only the inserts.
Key Features
Snap-in design
Clips into the rail and replaces loose cage nuts.
Two captive nuts per U
Vertically aligned #10-32 nuts for consistent mounting.
Shear-tested load
1U: 10 kg up to 400 mm deep · 2U: 20 kg up to 325 mm deep.
Pairs for larger devices
Combine inserts to mount multi-U equipment.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight · Buyer's Guide
SnapMount inserts save time in racks you re-arrange often, but the thread is the catch: #10-32 is standard in US equipment and less common in Europe, where M6 dominates. Check what screws you have before ordering. For shelves, brush panels and cable managers, see our rack accessories range.
✓ Buy it if you want tool-free, uniform mounting of UniFi or other rack devices and have #10-32 screws.
✕ Skip it if your rack and equipment use M6 screws, or your devices are deep and heavy without rear support.
→ Also consider standard M6 cage nut and screw sets for European racks.
Tell us your rack model and the devices you are mounting, and we will confirm the right hardware.
Colour
black
Χαρακτηριστικά
Product Code
04:532739
EAN Code
0810084693322
Manufacturer
Ubiquiti