Wera 2069/6 Kraftform Micro Nut Driver Set 6 Pieces 2-5 mm Hex 60 mm Blades with Rack Electronics
Brand:
Wera
Wera 2069/6 Kraftform Micro Nut Driver Set 6 Pieces 2-5 mm Hex 60 mm Blades with Rack Electronics
€66.46 inc. VAT
05118158001
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Please sign in so that we can notify you about a reply
Wera 2069/6 — 6-Piece Kraftform Micro Nut Driver Set
6 Sizes: 2–5 mm60 mm BladesKraftform Micro HandleRack Included
The 2069/6 is a six-piece precision nut driver set for electronics work: external hexagon sockets in 2, 2.5, 3, 3.5, 4 and 5 mm on 60 mm blades. These turn the small nuts and hex standoffs that hold circuit boards, connectors and panel hardware in place — the fasteners a screwdriver cannot touch. Each sits in a Kraftform Micro handle with a rotating cap and a fast-turning zone just below it, so the palm stays still while the fingers spin the driver, and a roll-off feature stops the tool leaving the bench. A rack is supplied for ordered storage. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
These are external hex nut drivers — they turn nuts and threaded standoffs. They are not internal hex / Allen drivers and will not fit socket-head cap screws. Nothing in the set is insulated or VDE-approved, so despite the “for electronic applications” name they must not be used on live circuits. The shafts are 60 mm, which limits how far a nut can be wound down a long threaded rod. Sizes run 2 to 5 mm only — nothing above 5 mm, and no imperial sizes.
Best For
✓ Electronics and PCB assembly
✓ Standoffs and panel hardware
✓ Instrument and enclosure servicing
✓ Model making and precision mechanics
Key Features
Six Sizes from 2 to 5 mm
2, 2.5, 3, 3.5, 4 and 5 mm across flats, each a dedicated driver rather than a socket on a handle. The 0.5 mm steps cover the standoff and small-nut sizes used throughout electronics hardware.
Kraftform Micro Handle
A rotating cap lets you anchor the hand on the top and spin the driver with the fast-turning zone below, which is how precision work gets done quickly without losing feel. A roll-off feature keeps the tool on the bench.
Hollow 60 mm Shafts
The sockets are hollow, so a nut can be run down over a short protruding thread rather than stopping as soon as the stud appears — useful on standoffs and panel studs.
Rack Supplied
A rack comes with the set so the six drivers sit in size order on a bench or wall instead of loose in a drawer. It is supplied in addition to the six, not counted among them.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
Electronics work stalls on hardware, not on screws: the standoff that will not come loose, the panel nut behind a connector, the hex spacer that has to be held while the board is fitted. A dedicated micro nut driver in each size is the fast answer, and the rotating cap is what makes it fast — you spin with two fingers instead of re-gripping every quarter turn. Just take the “for electronic applications” in the name as describing the sizes, not the safety rating: nothing here is insulated. Browse our Cable Tools - Testers category for more Wera precision tools, or the wider Cables range for related workshop supplies.
Buyer’s Guide
Buy it if
You work on electronics hardware and want a dedicated precision nut driver in every size from 2 to 5 mm, with a rack to keep them ordered.
Skip it if
You need internal hex drivers, insulated VDE tools, sizes above 5 mm, or long-reach shafts for deep studs.
Also consider
The Wera Kraftform Micro 12 Electronics 1 (05073677001) if you need screwdriver profiles rather than nut drivers, or the Kraftform Micro Universal 1 (05073675001) for a mixed precision set in a pouch.
Features - Wera - 05118158001
More Details
Product Code
04:455245
EAN Code
4013288032447
Manufacturer
Wera