Wera Tool-Check PLUS 1 Bit Ratchet Set 39 Pieces with BiTorsion Bits Screwdriver and 7 Metric Sockets
Brand:
Wera
Wera Tool-Check PLUS 1 Bit Ratchet Set 39 Pieces with BiTorsion Bits Screwdriver and 7 Metric Sockets
€119.31 inc. VAT
05049055001
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Please sign in so that we can notify you about a reply
Wera Tool-Check PLUS 1 — 39-piece set with a bit-holding screwdriver and BiTorsion bits
39 piecesBiTorsion bits813 bit-holding screwdriver7 sockets 5.5–13 mm
The Wera Tool-Check PLUS 1 (part number 05049055001) is the upgraded version of Wera’s pocket bit-and-socket case. It adds a 813 Kraftform bit-holding screwdriver to the 8001 A Zyklop Mini 1 ratchet, and lifts most of the bits from Torsion to BiTorsion grade, whose softer torsion zone absorbs load peaks instead of passing them to the tip. Twenty-eight bits, including five tamper-resistant TORX BO, and seven metric Zyklop sockets from 5.5 to 13 mm fill a rigid case of 190 x 100 x 35 mm. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
The ratchet has a 1/4 inch hexagon bit drive, not a square drive; the 870/1 adaptor converts it so the Zyklop sockets can be used. Note that Wera’s own bullet claims 28 BiTorsion bits, but by the datasheet 22 are BiTorsion and 6 are plain Z — the five TORX BO and the 8 mm hex. The 8790 HMA sockets are for manual and non-impact power tool use, never for an impact wrench; BiTorsion is designed for rotary power screwdrivers, not impact drivers, whose matching Wera line is Impaktor. Nothing here is insulated or VDE-tested.
Best For
✓ Mobile service and maintenance calls
✓ Powered screwdriving with a cordless driver
✓ Tamper-resistant TORX security fasteners
✓ Metric hex nuts from 5.5 to 13 mm
✓ Work needing both a ratchet and a straight driver
✓ A complete kit in a pocketable case
Key Features
BiTorsion bits absorb the load peaks
Wera builds a deliberately softer torsion zone into the shank, so a torque spike twists the shank elastically instead of reaching the hard, brittle tip. That is what extends bit life on a cordless driver, and it is the main upgrade over the standard Tool-Check.
813 bit-holding screwdriver added
A straight Kraftform driver at 1/4 inch x 78 mm sits alongside the ratchet, so light fixings and final tightening do not tie up the ratchet. It is the single extra piece that takes the set from 38 to 39.
8001 A Zyklop Mini 1 ratchet
Drop-forged full-steel with 60 teeth and a 6 degree return angle, taking 1/4 inch bits directly. A thumbwheel spins the bit down and a lever reverses direction one-handed, and Wera rates the tool at over 65 Nm.
Five TORX BO security bits and seven sockets
TX 10 to TX 30 in the bore-hole version clear the securing pin in tamper-resistant TORX screws, and 8790 HMA Zyklop sockets cover 5.5, 6, 7, 8, 10, 12 and 13 mm, colour-coded by size.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
The step from Tool-Check to Tool-Check PLUS is really a decision about how you drive screws. If most of your work is by hand, the standard set does the same job for less; if a cordless driver is in your hand all day, BiTorsion is a genuine consumable-life upgrade because the torsion zone takes the spike that would otherwise chip the tip. The 813 screwdriver is the other half of the argument and more useful than it sounds, since a ratchet is a poor tool for the last careful quarter-turn. Two things to keep straight: the ratchet takes bits rather than sockets directly, and Wera’s claim of 28 BiTorsion bits is really 22. Browse our Cable Tools and Testers range for the rest of the hand-tool line-up, or the wider Cables and Accessories section for installation material.
Buyer’s Guide
Buy it if
You drive screws with a cordless driver as well as by hand and want BiTorsion bits, a straight screwdriver and a 60-tooth ratchet with metric sockets in one pocket case.
Skip it if
You work entirely by hand and do not need BiTorsion, you need imperial sizes, or you need insulated tools for live work.
Also consider
The Wera Tool-Check 1 if hand work is all you do, the Tool-Check PLUS 2 for Square-Plus Robertson instead of Pozidriv, or the Tool-Check PLUS Imperial 1 for inch sizes.
Features - Wera - 05049055001
More Details
Product Code
04:545023
EAN Code
4013288234896
Manufacturer
Wera